Serving the Thousand Oaks area  ·  (805) 309-3879  ·  Open Mon-Sun 7am-7pm
📞 (805) 309-3879 Free Quote

Metal Roofing in Santa Paula, CA (93060) · Local Professionals

Thousand Oaks Metal Roofing · Fast response in Santa Paula and the Thousand Oaks area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+315Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Santa Paula is a citrus town with a roofing problem that's older than most of its residents. The Victorians and early 1900s farmhouses along Main Street and around the Depot have survived a century of sun, wind, and the occasional earthquake, and their roofs show it. Out toward the orchards and ranchettes off Telegraph Road and Foothill Road, you've got metal barns, shops, and packing sheds that take a beating from the same elements.

We're Thousand Oaks Metal Roofing, and we've been working roofs across Ventura County long enough to know that Santa Paula isn't just another stop on the map. Whether it's a historic home near the California Oil Museum that needs copper detailing or a commercial ag building off Highway 126 that needs a standing seam retrofit, we bring the same approach: honest assessment, solid materials, and work that holds up. Call us at (805) 309-3879 for a free estimate.

Metal Roofing in Santa Paula (93060)

Santa Paula sits in a valley where the heat hangs in the summer and the Santa Ana winds come through in the fall, pushing embers from the hills right into roof edges and vents. The housing stock ranges from Victorian-era homes downtown with steep pitches and complex flashings to mid-century ranch houses with low slopes and shake roofs that are past their prime. Out on the east side, toward the Santa Clara River and the orchards, you've got agricultural buildings with corrugated panels that have been patched a dozen times. The soil is clay-loam and rocky in places, which affects drainage and how we handle runoff from roof valleys. Access can be tight on the older lots near downtown, where alleys are narrow and power lines run close to the eaves. We've learned to plan for that before we show up, not after.

Our team has worked on everything from stone-coated steel on a Spanish-style home near Harding Park to copper accent roofs on commercial buildings along Harvard Boulevard. We know what holds up here and what doesn't. When we recommend a metal roof, it's because we've seen how they perform through a decade of hot summers and winter storms that come in fast and heavy after months of dry weather.

Our services in Santa Paula

How a Job Works in Santa Paula

Step 1: You call us at (805) 309-3879 or fill out the form, and we set up a free on-site assessment. We'll walk the roof, check the attic if accessible, look at flashing and penetrations, and talk through what you're dealing with. If it's a historic home or in a design review area, we'll note that upfront so we can plan for it.

Step 2: Once you approve the scope and price, we pull the permits through the City of Santa Paula Building Department and schedule the work. On tighter lots near downtown, we plan material staging carefully so we're not blocking your neighbor's driveway or the alley. If your home is in a historic district, we coordinate with the city on panel profiles and colors that meet the guidelines. For commercial or ag buildings, we work around your operating hours so we're not in the way.

Step 3: When the job's done, we clean up like we were never there. That means magnet sweeping for nails, hauling away old material, and doing a final walkthrough with you to make sure you're satisfied. We don't leave until you've signed off and you know how to reach us if anything comes up.

Pricing in Santa Paula depends on the job, but here are some realistic ballparks. Metal roof installation starts around $8 per square foot, standing seam runs about $10, metal roof replacement is around $9, and a retrofit over existing shingles starts at $7. For repairs, most leak calls start around $450, screw replacement and re-fastening runs from $750, and flashing or chimney work starts at $600. Coating and painting is the budget-friendly option at $2.50 per square foot, and gutters run about $9 per linear foot. The big cost factors are roof size, pitch, how many layers are already there, access, and whether there's damage that needs structural repair before we can put metal on. We give free estimates, so call (805) 309-3879 and we'll give you a straight number.

My Victorian near downtown Santa Paula has its original wood shake roof and I want to switch to metal. What should I know?
Older homes near Main Street and the Depot often have skip sheathing and complex roof lines that need careful detailing. We'll check the decking first, because you can't always just lay metal over what's there. If the home is in a historic district, we'll help you pick a panel profile and color that meets the city's design guidelines. Copper or stone-coated steel are popular choices for these homes because they look right and last.
A storm just blew through Santa Paula and I've got a leak. How fast can you get out?
We prioritize active leaks and storm damage. Call us at (805) 309-3879 and we'll get someone out as soon as possible, often the same day or next. We'll tarp it if needed to stop further damage, then give you a written estimate for the repair. We work with your insurance if you're filing a claim, but we never promise coverage, that's up to your adjuster.
What does a typical metal roof replacement cost for a 1,500 square foot ranch house in Santa Paula?
For a house that size, you're usually looking at somewhere between $12,000 and $18,000 for a basic standing seam or metal shingle roof, depending on pitch, how many layers need to come off, and whether there's any decking repair. A retrofit over existing shingles can bring that down. We give free on-site estimates so you get a real number, not a guess.
Do I need a permit to replace my roof in Santa Paula, and how long does it take?
Yes, the City of Santa Paula Building Department requires a permit for a full re-roof or replacement. The exact requirements and fees depend on the scope, and if your home is in a historic district there may be additional design review. We handle the permitting for you and schedule inspections. Timing varies, but we'll give you a realistic timeline when we do the estimate.
My neighbor's tree hangs over my roof and I'm worried about limbs falling. What can I do about property lines and my HOA?
In California, you generally have the right to trim branches that overhang your property, but it's best to talk to your neighbor first. If you're in an HOA, check your CC&Rs before you do anything, because some have rules about tree trimming and roof color changes.
Are you insured for work on my Santa Paula property?
Yes, we carry general liability insurance and workers' compensation coverage. That protects you if anything goes wrong on the job.
What should I do to maintain my metal roof in Santa Paula between storms?
Check your gutters and downspouts in the fall before the rains hit, because debris from the oaks and sycamores can clog them fast. Look for loose fasteners or backed-out screws after a windy fall, and keep an eye on flashing around chimneys and skylights. If you see anything that concerns you, call us for a free inspection. A little maintenance goes a long way here.
Why choose us?

Trusted professionals in Thousand Oaks

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Thousand Oaks

All your work handled by qualified professionals in Thousand Oaks

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

315+ Verified Client Reviews in Thousand Oaks

⭐⭐⭐⭐⭐ 4.9/5 · 315 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Thousand Oaks · Response within 24h · No commitment · ☎ (805) 309-3879

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Thousand Oaks ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm