Serving the Thousand Oaks area  ·  (805) 309-3879  ·  Open Mon-Sun 7am-7pm
📞 (805) 309-3879 Free Quote

Metal Roofing in Fillmore, CA (93015) · Local Professionals

Thousand Oaks Metal Roofing · Fast response in Fillmore and the Thousand Oaks area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+315Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Fillmore is a small town with a big agricultural heart, where historic downtown storefronts on Central Avenue sit a few blocks from orchards and citrus groves that have been in families for generations. The housing stock tells the story: early 1900s craftsman cottages with steep gable roofs, mid-century ranch homes on generous lots, and a growing number of newer builds on the edges of town near the Fillmore & Western Railway depot. Many of these roofs are original wood shake or aging composition, and the hot, dry summers and Santa Ana winds coming through the Santa Clara River Valley have taken a toll.

That is why homeowners in Fillmore (93015) call Thousand Oaks Metal Roofing. We know the specific challenges here: the intense UV that bakes asphalt shingles, the wind-driven embers from nearby brush fires, and the occasional heavy winter storm that finds every weak flashing point. We are based in Thousand Oaks and serve Fillmore and the surrounding areas, and we bring the same straightforward approach to every job, whether it is a small repair on a bungalow near Shiells Park or a full metal roof replacement on an orchard property off Telegraph Road.

Metal Roofing in Fillmore (93015)

Fillmore sits in the Santa Clara River Valley, where the ground can be sandy loam near the river and rockier as you move toward the foothills. That matters for roof work because drainage and foundation movement affect how a roof performs over time. Many properties here have mature valley oaks and sycamores that drop limbs and fill gutters with debris, and the dry grass slopes behind town are a constant wildfire concern. We see a lot of wind-lifted panels and failed fasteners after a Santa Ana event, and we know how to secure a metal roof against those gusts. On the older homes downtown, tight lot lines and mature landscaping can make access tricky, so we plan staging carefully to avoid damaging fences, driveways, or neighboring property.

Our team has worked on everything from corrugated panel roofs on agricultural buildings to standing seam and stone-coated steel on residential homes. We understand the local building department review process and can help you navigate permit requirements for a re-roof or replacement. Whether you are in the historic district or out on a ranchette, we bring the same attention to detail and respect for your property.

Our services in Fillmore

How a Job Works in Fillmore

Step 1: You call us at (805) 309-3879 or request a free estimate online. We schedule an on-site assessment at a time that works for you, and we walk the roof, check the attic if accessible, and look at flashing, fasteners, and panel condition. We then give you a clear written estimate with options, no pressure and no surprises.

Step 2: Once you approve, we pull the necessary permits (we handle the paperwork with the City of Fillmore building department) and schedule the work. On tight downtown lots, we plan material delivery and staging to keep the street clear and neighbors happy. For historic district properties, we coordinate any design review requirements before ordering materials. Our crew arrives on time, protects your landscaping, and works efficiently to minimize disruption.

Step 3: When the job is done, we do a thorough cleanup, including magnet sweeping for nails and debris. We walk the finished roof with you, explain the work performed, and make sure you are satisfied before we leave. We leave your property clean and your roof ready for the next storm season.

Pricing for metal roofing in Fillmore depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and corrugated or ribbed panel roofing at $5.50 per square foot, which is often a good fit for agricultural buildings and simpler residential roofs. A full metal roof replacement starts at $9 per square foot, and a retrofit over existing shingles starts at $7 per square foot (subject to code limits on layers). Repairs and leak fixes start at $450, and screw replacement or re-fastening starts at $750. We always provide a free estimate so you know exactly what to expect. Call (805) 309-3879 to schedule yours.

My house is in the historic district near Central Avenue. Can I install a metal roof that looks appropriate?
Yes, many homeowners in Fillmore's historic district choose metal roofing that mimics traditional materials, such as stone-coated steel or metal shingles in colors that blend with the neighborhood. We can help you select a profile and color that meets design review requirements, and we handle the coordination with the city so you do not have to.
A windstorm just lifted some panels on my roof off Telegraph Road. How fast can you respond?
We offer free inspections for storm and wind damage and can usually schedule an assessment within a day or two, depending on demand. Call us at (805) 309-3879, and we will prioritize emergency repairs to prevent further water intrusion. We can tarp or secure the area temporarily if needed.
What is the typical cost to replace a wood shake roof with metal on a 1,500 square foot ranch home in Fillmore?
For a 1,500 square foot ranch home, a metal roof replacement typically ranges from $13,500 to $18,000 depending on the metal type, roof pitch, and whether any decking repairs are needed. Corrugated panel is on the lower end, while standing seam is higher. We provide a detailed free estimate after inspecting your roof.
Do I need a permit from the City of Fillmore to re-roof my house?
Yes, a roofing permit is generally required for a full replacement or re-roof in Fillmore. The exact requirements and fees vary, so we always verify with the city building department before starting work. We handle the permit application and inspections as part of our service.
My neighbor's oak tree hangs over my roof. Can I trim it, and does my HOA need to approve my new roof color?
In California, you generally have the right to trim branches that encroach on your property, but it is best to check with your neighbor and local ordinances first. If you are in an HOA, you will need architectural approval for a roof color change. We can provide material samples and documentation to help with the HOA submittal.
Are you fully insured for work at my Fillmore property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Fillmore's climate?
In Fillmore, metal roofs should be inspected annually, especially after the windy fall season and before winter rains. Check for loose fasteners, debris buildup in valleys and gutters, and any signs of sealant wear around flashings. We offer free inspections and can perform minor maintenance to keep your roof performing well for decades.
Why choose us?

Trusted professionals in Thousand Oaks

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Thousand Oaks

All your work handled by qualified professionals in Thousand Oaks

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

315+ Verified Client Reviews in Thousand Oaks

⭐⭐⭐⭐⭐ 4.9/5 · 315 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Thousand Oaks · Response within 24h · No commitment · ☎ (805) 309-3879

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Thousand Oaks ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm