Serving the Thousand Oaks area  ·  (805) 309-3879  ·  Open Mon-Sun 7am-7pm
📞 (805) 309-3879 Free Quote

Metal Roofing in Malibu, CA (90263) · Local Professionals

Thousand Oaks Metal Roofing · Fast response in Malibu and the Thousand Oaks area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+315Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Malibu roofs live in a war zone. Canyon and ridge homes from Big Rock to Latigo sit above the marine layer, where Santa Ana winds drive embers into every eave and salt air eats at fasteners year round. The housing stock is a mix of 1960s beach cottages, canyon ranches, and newer ridge-top estates, most with steep pitches, tight lots, and views that make access a puzzle.

We are Thousand Oaks Metal Roofing, and we have been working the canyons and coast from our Conejo Valley base for years. Malibu homeowners call us because we understand the specific failure points here: ember intrusion at ridge vents, fastener corrosion from salt fog, and panels lifted by the same winds that carry the fire.

Metal Roofing in Malibu (90263)

Malibu properties are not typical suburban lots. Many sit on graded pads cut into steep canyon walls, with narrow private drives, switchbacks, and limited staging for dumpsters or material deliveries. Soil is often rocky and clay-heavy, which affects drainage and how we anchor flashing. The marine layer keeps morning air damp, then the sun bakes the roof by afternoon, so metal expands and contracts daily. That movement is why fastener and seam integrity matter more here than inland. We see a lot of wind-lifted panels after Santa Ana events, and ember intrusion at vents and ridge caps is a real concern for canyon homes. Standing seam with concealed fasteners and proper ember-resistant detailing is our go-to for ridge properties, and we often pair it with a metal roof inspection to document existing conditions for insurance.

Our team has worked roofs in Malibu Colony, Point Dume, and the Encinal and Latigo canyons. We understand how salt air affects different metals and finishes, and we help you choose a panel profile and color that fits the neighborhood while holding up to the coast.

Our services in Malibu

How a Job Works in Malibu

Step 1: You call (805) 309-3879 or request a free estimate online. We schedule an on-site assessment, which for Malibu means we walk the roof, check access, and look at the specific conditions (ember gaps, fastener condition, flashing at chimneys and skylights). We also review any HOA or city requirements with you early so there are no surprises.

Step 2: Once you approve the scope and price, we handle permitting through the local building department and coordinate delivery and staging. On tight canyon lots, we plan material drops carefully, sometimes using a conveyor or crane if the driveway cannot handle a truck. We protect landscaping and keep work areas contained. Installation follows manufacturer specs and local code, with ember-resistant detailing where required.

Step 3: When the job is done, we walk the roof and gutters with you, magnet-sweep the driveway and grounds for nails, and haul away all debris. We leave your property clean and provide a final inspection checklist.

Pricing in Malibu reflects the access and condition challenges. As a ballpark, metal roof installation starts around $8 per square foot, standing seam from $10, metal roof replacement from $9, and retrofit over existing shingles from $7. Repairs start at $450, leak repairs at $450, and screw replacement or re-fastening at $750. Coating and painting start at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. The final number depends on roof size, pitch, access (canyon drives and steep grades add labor), existing layers, and urgency. We give free estimates and explain exactly what drives the cost. Call (805) 309-3879 to schedule.

My canyon home in Malibu has ember intrusion concerns. What metal roofing details help?
For canyon and ridge homes, we focus on closing gaps at ridge caps, vents, and eave edges. Standing seam with concealed fasteners reduces wind uplift, and we use ember-resistant venting and flashing details. We also inspect and replace any deteriorated underlayment or sheathing that could allow embers to smolder. The goal is to deny embers a place to land and enter.
A storm just lifted panels on my roof in Malibu. How fast can you respond?
We prioritize active leaks and wind damage. Call (805) 309-3879 and we will schedule an inspection as soon as possible, often same or next day depending on weather and access. We can tarp or secure the area to prevent further damage and provide a written scope for repair or replacement. We document everything for insurance if needed.
What does a typical metal roof repair cost in Malibu?
Most repairs start at $450 for minor leak fixes or flashing repairs. Screw replacement and re-fastening starts at $750. The final cost depends on the number of leaks, panel condition, access difficulty, and whether the repair is isolated or part of a larger issue. We give a free estimate before any work begins.
Do I need a permit for a metal roof replacement in Malibu?
Yes, a full replacement or re-roof typically requires a permit from the local building department. Requirements and fees vary, and historic or coastal zones may have additional review. We handle the permitting process for you and make sure the installation meets local code, including any limitations on layers if you are retrofitting over existing shingles.
My HOA has design rules. Can you help with approval for a metal roof?
We can provide product specifications, color samples, and installation details for your HOA submittal. Many Malibu HOAs and architectural committees want to see panel profile, color, and how the roof will look from the street or neighboring properties. We coordinate with you and the HOA to make sure the chosen system meets both their rules and your performance needs.
Are you fully insured for work at my Malibu property?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you as the property owner and covers our crew on site.
What maintenance does a metal roof need in Malibu's coastal climate?
Salt air and daily expansion cycles mean annual inspections are smart. We check fasteners for corrosion or backing out, clear debris from gutters and valleys, and look at sealant and flashing condition. Catching a loose fastener or worn seal early prevents leaks. We offer free estimates for inspections and can set up a maintenance plan.
Why choose us?

Trusted professionals in Thousand Oaks

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Thousand Oaks

All your work handled by qualified professionals in Thousand Oaks

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

315+ Verified Client Reviews in Thousand Oaks

⭐⭐⭐⭐⭐ 4.9/5 · 315 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Thousand Oaks · Response within 24h · No commitment · ☎ (805) 309-3879

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Thousand Oaks ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm